|
|
 |
|
 |
 |
59B59B |
 | |
 |
Profile
•Single seal
•Balanced
•Indepndent of birection of rotation
•To EN12756(DIN24960) | |
| This series mechanical seal is designed with multi-spring structure and uniformly pressurized sealing face.It is easy to install and has a good inter-changeability.This seal is widely used in oil,water,organic solvent,and other weak corrosive medium. |
 |
The secondary seal material of mechanical seal of 59B is Tefion .It is applied in the corrosion resistant medium.
The secondary seal of mechanical seal of 58B is "O" rubber ring.The material can be chosen according to the working condition The installtion dimension of them is the same one. |
 |
The left drawing shows the rotation driven by pin.The pin is prepared by the client himself,which is installed on the driven unit or impeller.Put the seal packet into pin when installing.The installtion has high requirement for the dimension of the upper seal chamber. | |
| Operating limits |
Specification:14¡«100mm
Pressure:¡Ü6.0Mpa
Temperature:-20degree¡«200degree
Linear speed:¡Ü20m/s
Axial movement:¡À0.5mm | |
| Combination of materials |
|
Sealing face:Graphite,Silicon carbide,Tungsten carbide,Aluminum oxide
Secondary sealing:Acrylonitrile rubber,Fluorine rubber,Ethylene propylene rubber,PTFE
Metal component:Stainless steel,SUS304,SUS316L | | |
| Unit:mm |
 | |
|
|
 |
|
 |
|
