|
|
 |
|
 |
 |
TK126 |
 | |
|
|
Profile
TK126 series of mechanical seal belongs to internal、internal flow、single-end、single-spring、non-equilibrium structure.The main characteristics are as follows.
Use retain to combine spring、corrugate seal ring、rotating seal ring、driving sleeve into rotary seat so that other parts can combine into an assembly to facilitate and usage.
The series use corrugate seal ring to solve problem of leakage caused by seal ring which can not be compensated due to wear because Oring can not move freely on pump axle due to corrosion of pump axle after long-time service in medium.
The series of seal use corrugate seal ring to solve problem of seal failure due to disengaged seal face caused by drunkenness of pump axle.
The series of seal can increase service life of water pump within its scope. |
 |
| Operating limits |
Pressure in the sealed chamber:0~1.2Mpa
Temperature in the sealed chamber:-20degree゛150degree
Linear velocity:＋3000r/min
Medium:water、polluted water、oil and minor corrosive liquid | |
| |
| Unit:mm |
 | |
|
|
 |
|
 |
|
