|
|
 |
|
 |
 |
TK318 |
 | |
 |
Profile
1.RPTARY O RING VITON/EPR*/AFLAS/KALREZ*
2.SLEEVE O RING VITON/EPR*/AFLAS/KALREZ*
3.SLEEVE 316L STAINIESS STEEL
4.SPRING HASTELLOY C
5.ROTARY FACE 316L SS-CARBON/TC/SIC*
6.STATIONARY FACE CERAMIC/316 SS-CROX/TC/SIC
7.STATIONARY O RING VITON/EPR*/AFLAS/KALREZ*
8.GLAND 316L STAINIESS STEEL
9.CLAMP RING 316L STAINIESS STEEL
10.DRIVE RING STAINIESS STEEL
11.ANTI-TAMPER SCREWS STAINIESS STEEL
12.CLIP SREWS STAINIESS STEEL
13.SETTING CLIPS HARD PLASTIC
| |
| Equilibrium rotating seal ring can be installed and used simply and conveniently so it is an excellent substitute to change stuffing sealing for pumps. |
 |
| Operating limits |
Metallic parts are as follows:316 Stainless steel
O ring:Fluorocarbon
Prohibited contace area:carbon matrix、graphite、carborundum
Pressure in the sealed chamber:≤25Mpa
Spring:High-temperature nickel-based alloy
Rotating contact area:carborundum、tungsten carbide
Temperature in the sealed chamber:≤205℃
Linear velocity:≤20m/Sec | |
| |
| Unit:mm |
 |
Why do you have touse the stuffing or conventional two-part seals that will impair pump and cover? Saving more energy,no abrasion to axis,easy and economi cal to install,TK318 is your best choice.
A-cover diameter,B-stuffing chamber inside diameter,C-minimum depth of stuffing chamber,D-axis cover diameter,E-outside seal length of stuffing chamber,F-minimum bolt center corresponding to different bolt specifications. | |
|
|
 |
|
 |
|
