|
|
 |
|
 |
 |
58U59U |
 | |
 |
Profile
•Single seal
•Balanced
•Indepndent of birection of rotation
•To EN12756(DIN24960) | |
| This series mechanical seal is designed with multi spring structure,and is compact in structure.It has a small axial size and reliale tightness.It is widely used in oil,water,organic solvent,and other weak corrosive medium. |
 |
| The left drawing shows the rotation driven by pin.The pin is prepared by the client himself,which is installed on the driven unit or impeller.Put the seal packet into pin when installing.The installtion has high requirement for the dimension of the upper seal chamber. |
 |
The secondary seal material of mechanical seal of 59U is tefion and can be used in the corrosive chemical medium.
The secondary seal of mechanical seal of 58U is O rubber ring. The installtion dimension of them is the same one. | |
| Operating limits |
Specification:14¡«100mm
Pressure:¡Ü1.7Mpa
Temperature:-20degree¡«200degree
Linear speed:¡Ü25m/s
Axial movement:¡À0.5mm | |
| Combination of materials |
|
Sealing face:Graphite,Silicon carbide,Tungsten carbide,Aluminum oxide Secondary sealing:Acrylonitrile rubber,Fluorine rubber,Eth-ylene propylene rubber,PTFE Metal component:Stainless steel,SUS304,SUS316L | | |
| Unit:mm |
 | |
|
|
 |
|
 |
|
